 |
17979031 Woodcraft
V-35 Foot Control
The V-35 has stepped variable speed (14k, 22k, 27k, 33k), with speed dial clearly marked on the faceplate of the power unit. Forward and reverse are available easily on the same faceplate, as is the power rocker switch (easy to see and operate as it is bright red). The handpiece receptacle is on the left side of the front plate, so all connections and controls are immediately at hand and easy to reach. The handpiece reverse and forward switch defaults to forward and quickly snaps back to forward when released from the reverse position. The coiled cord on the handpiece straightens to more than five feet in length, and is light enough to not interfere with movement when you're carving. You get greater freedom of movement than is possible with flexible shafts. The handpiece is molded and fits the hand exceptionally well. Optional Foot Control allows for full range variable speed from 0 - 33,000 RPM. Accepts 1/8" and 3/32" shank bits.
$59.99 Now: $21.99 > Learn more @ Shop.Com!
|
|
20808536 ShoppersChoice.com
Ammco Negative Rake Brake Lathe Bits - 6 Pack
Carbide for long lasting performance six cutting edges on each bit for use with ammco brake lathes comes with screws
$27.40 Now: $22.26 > Learn more @ Shop.Com!
|
|
17980165 Woodcraft
1/2" Dia., Small Four Spur Center, #2 MT
Having the correct size and style drive center makes your turning easier and safer. When turning small pieces a small drive center tears out less frequently and is much less likely to be struck by your tool. Heavier work demands a large, well-made center for a positive, safe grip to drive the piece. 1" Diameter Two Spur Center #2 MT , for turning natural edge bowls and other rough, uneven blanks. 1-1/8" Diameter Four Spur Center #2 MT , with removable center point. Small Drive Centers for turning spindles and other small work between centers.
$23.99 > Learn more @ Shop.Com!
|
|
17980166 Woodcraft
3/8" Dia., Small Four Spur Center, #2 MT
Having the correct size and style drive center makes your turning easier and safer. When turning small pieces a small drive center tears out less frequently and is much less likely to be struck by your tool. Heavier work demands a large, well-made center for a positive, safe grip to drive the piece. 1" Diameter Two Spur Center #2 MT , for turning natural edge bowls and other rough, uneven blanks. 1-1/8" Diameter Four Spur Center #2 MT , with removable center point. Small Drive Centers for turning spindles and other small work between centers.
$23.99 > Learn more @ Shop.Com!
|
|
8446648 Woodcraft
Lathe Dusthood
Eliminates nearly all of that fine turning dust that flies into your face and collects all over your lathe and stand. The 6" x 9" opening is ideal for spindle and small to intermediate bowl turning. The hinged clear plastic shield adjusts for optimal protection and collection, while allowing an unobstructed view of the workpiece. The "L" bracket allows you to easily clamp the hood onto most lathes at any point along their bed. The 4" fitting allows you to utilize standard collection hose or use an adapter to "step down" to your shop vac's hose.
$24.50 > Learn more @ Shop.Com!
|
|
18140086 Woodcraft
7/8"-14 TPI RH Insert
The newest evolution of the classic Nova Chuck is finally available - the SuperNova 2 ! Its nickel plated body is made from high grade K1045 steel machined to allow closer tolerances. Its patented gearing system delivers incredible gripping power and is over a third faster than the original SuperNova. With SuperNova 2 gripping power you'll find yourself turning longer, more delicate stems. Large, rough and uneven work that you couldn't handle before can now be turned with greater security. The SuperNova 2 requires only one hand to operate using a ball nosed Allen key with a large easy grip handle (included). It's quick to tighten and requires much less effort. The ball nose allows the handle to operate at an angle while tightening the chuck. The SuperNova 2 has a fully sealed heavy duty backing plate made from Duracon 25 composite which is reinforced with stranded glass fiber. Backing plate design incorporates a 24 division index for future indexing accessories. All of the original Nova Chuck accessories, jaws, and inserts are 100% compatible with the SuperNova 2 ! The unique and user friendly features of this chuck prove it was designed by and for woodturners. Diameter of chuck is 3-7/8", depth is 3-3/8", weight 5-1/2 lb. Includes 50mm jaw set, T-bar, Allen wrenches, woodworm screw, and manual. Requires a threaded body insert to fit your lathe.
$24.99 > Learn more @ Shop.Com!
|
|
17980168 Woodcraft
1" Dia., Two Spur Center, #2 MT
Having the correct size and style drive center makes your turning easier and safer. When turning small pieces a small drive center tears out less frequently and is much less likely to be struck by your tool. Heavier work demands a large, well-made center for a positive, safe grip to drive the piece. 1" Diameter Two Spur Center #2 MT , for turning natural edge bowls and other rough, uneven blanks. 1-1/8" Diameter Four Spur Center #2 MT , with removable center point. Small Drive Centers for turning spindles and other small work between centers.
$24.99 > Learn more @ Shop.Com!
|
|
24158936 Woodcraft
7/8"-14 TPI RH Insert
Nova Titan 5" Companion is specifically designed for large and heavy turnings. It is a full 5" in diameter, 1" larger than the Super Nova chuck. The jaw mechanism is easily opened and closed with a large T-handled hex key wrench (included). Accepts all the jaw sets from both the Super and Standard Nova Chucks (accessory power grip jaws in photo available separately). Requires a threaded body insert to fit your lathe and a set of jaws. Threaded Body Inserts fit all Nova chucks. Extra Screw Chuck. 19mm (3/4") long, RH. Jaw Fastening Spares Kit - 8 extra screws, 2 allen wrenches.
$24.99 > Learn more @ Shop.Com!
|
|
18140092 Woodcraft
1"-8 TPI RH Insert
The newest evolution of the classic Nova Chuck is finally available - the SuperNova 2 ! Its nickel plated body is made from high grade K1045 steel machined to allow closer tolerances. Its patented gearing system delivers incredible gripping power and is over a third faster than the original SuperNova. With SuperNova 2 gripping power you'll find yourself turning longer, more delicate stems. Large, rough and uneven work that you couldn't handle before can now be turned with greater security. The SuperNova 2 requires only one hand to operate using a ball nosed Allen key with a large easy grip handle (included). It's quick to tighten and requires much less effort. The ball nose allows the handle to operate at an angle while tightening the chuck. The SuperNova 2 has a fully sealed heavy duty backing plate made from Duracon 25 composite which is reinforced with stranded glass fiber. Backing plate design incorporates a 24 division index for future indexing accessories. All of the original Nova Chuck accessories, jaws, and inserts are 100% compatible with the SuperNova 2 ! The unique and user friendly features of this chuck prove it was designed by and for woodturners. Diameter of chuck is 3-7/8", depth is 3-3/8", weight 5-1/2 lb. Includes 50mm jaw set, T-bar, Allen wrenches, woodworm screw, and manual. Requires a threaded body insert to fit your lathe.
$24.99 > Learn more @ Shop.Com!
|
|
18140088 Woodcraft
3/4"-16 TPI RH Insert
The newest evolution of the classic Nova Chuck is finally available - the SuperNova 2 ! Its nickel plated body is made from high grade K1045 steel machined to allow closer tolerances. Its patented gearing system delivers incredible gripping power and is over a third faster than the original SuperNova. With SuperNova 2 gripping power you'll find yourself turning longer, more delicate stems. Large, rough and uneven work that you couldn't handle before can now be turned with greater security. The SuperNova 2 requires only one hand to operate using a ball nosed Allen key with a large easy grip handle (included). It's quick to tighten and requires much less effort. The ball nose allows the handle to operate at an angle while tightening the chuck. The SuperNova 2 has a fully sealed heavy duty backing plate made from Duracon 25 composite which is reinforced with stranded glass fiber. Backing plate design incorporates a 24 division index for future indexing accessories. All of the original Nova Chuck accessories, jaws, and inserts are 100% compatible with the SuperNova 2 ! The unique and user friendly features of this chuck prove it was designed by and for woodturners. Diameter of chuck is 3-7/8", depth is 3-3/8", weight 5-1/2 lb. Includes 50mm jaw set, T-bar, Allen wrenches, woodworm screw, and manual. Requires a threaded body insert to fit your lathe.
$24.99 > Learn more @ Shop.Com!
|
