|
Show 25 products per page |
|
 |
20800327 ShoppersChoice.com
Ammco Brake Lathe Arbor - 1 Inch
Arbor - cap. 100lbs. - use with 3102 arbor nut - for models 2002,3000,4000,4100,7000,7500,7700
$225.05 Now: $170.77 > Learn more @ Shop.Com!
|
|
8457176 Rockler Woodworking and Hardware
Oneway Talon Chuck System
This is an ideal chuck for mini and mid-size lathe owners who want a power-grip, key-operated chuck. Its perfect for lathes with a 16" swing or less! Features single-hand key operation, patented over-extension safety system, 4-jaw scroll chuck and smooth-glide base jaw design. Requires one of the two inserts listed below. (Sold separately).
$189.99 > Learn more @ Shop.Com!
|
|
17979029 Woodcraft
BUFFALO V-35 Micromotor Carver
The V-35 has stepped variable speed (14k, 22k, 27k, 33k), with speed dial clearly marked on the faceplate of the power unit. Forward and reverse are available easily on the same faceplate, as is the power rocker switch (easy to see and operate as it is bright red). The handpiece receptacle is on the left side of the front plate, so all connections and controls are immediately at hand and easy to reach. The handpiece reverse and forward switch defaults to forward and quickly snaps back to forward when released from the reverse position. The coiled cord on the handpiece straightens to more than five feet in length, and is light enough to not interfere with movement when you're carving. You get greater freedom of movement than is possible with flexible shafts. The handpiece is molded and fits the hand exceptionally well. Optional Foot Control allows for full range variable speed from 0 - 33,000 RPM. Accepts 1/8" and 3/32" shank bits.
$369.99 Now: $209.99 > Learn more @ Shop.Com!
|
|
7970393 Northern Tool & Equipment Company
Jet Lathe Stand For Item 143348
Heavy duty steel bench with center compartment and lower shelf. Lathe NOT included.
$274.99 > Learn more @ Shop.Com!
|
|
17977073 Woodcraft
10" Midi Duplicator
For anyone who has to make more than a single turned object, duplicators are almost essential to a good job--most tables, for example, look more professionally done when all the legs match. If you're making a production run of pens for advertising or other purposes, getting them as close to alike as possible, and doing the job as fast as possible, is important. VEGA duplicators remove stock faster than all but the most experienced woodworkers can, while keeping within very tight tolerances (if the workpiece is heavy enough to not deflect, up to 1/2" can be removed per pass). It works off a template, and can easily work off an original turning (with a 2" maximum turning diameter). Most small-scale lathe duplicating machines do not work well, are poorly made, and the cutters are cheap, often hard or impossible to sharpen, and difficult to replace. And the duplicators will fit only a single machine. VEGA has changed all that. Their three Lathe Duplicators cover mini and midi lathes, and full-sized lathes with swings up to 16". A narrow diamond shaped HSS cutter is included with each duplicator and replacement cutters are available. The Diamond "V" Kit adapts the duplicator to use solid carbide inserts for production situations where frequent sharpening of the cutter is necessary. Each insert is two-sided and replacement inserts are available. The Midi Duplicator is designed to fit almost any midi or mini lathe on the market and copies parts up to 10" long (there is a 24" version available, too). A nice feature of the Vega is that you retain the option to use hand tools to finish the work or to make changes--the Duplicator can either be removed, or mounted on the back of the lathe with the cutter upside down). Not illustrated. The Utility II Duplicator has all the abilities of the Midi Duplicator, but extends sizes to 10-12" swing lathes, with a turning length of up to 36"--this one comes with hardware and mounting brackets for 10-12" swing lathes, plus a riser kit for 16" NOVA lathes. Only uses flat templates, not illustrated. The VEGA Professional Duplicator is designed to fit all 10 to 16" swing lathes, is available in 36" and 48" lengths and comes with all the appropriate mounting hardware. These VEGA Lathe Duplicators share many features: they are designed to be rigid, and are; they are easy to use, with all controls located for fast and easy access; fast set-up (initial set-up takes about 30 minutes, but after that, a couple minutes usually does it); micro-adjustments are easily handled; the duplicators are durable--the chain drive adjuster is one example of solidly engineered-in durability.
$274.99 > Learn more @ Shop.Com!
|
|
17976463 Woodcraft
Jet Mini Lathe Model 708351
Model 708351. Heavy cast iron construction provides stable, virtually vibration free turning. Six speeds: 500, 1200, 1450, 2130, 2400, 3950; 10" swing over bed, 14" spindle capacity; 1" x 8 TPI spindle; #2 Morse Taper on head and tail stock; 5" tool rest; Motor: 1/2 HP, 1 Ph, 115V; Overall dimensions 24-5/8" L x 7-1/4" W x 14" H. Shipping weight 78 lb.
$279.99 > Learn more @ Shop.Com!
|
|
17977078 Woodcraft
24" Midi Duplicator
For anyone who has to make more than a single turned object, duplicators are almost essential to a good job--most tables, for example, look more professionally done when all the legs match. If you're making a production run of pens for advertising or other purposes, getting them as close to alike as possible, and doing the job as fast as possible, is important. VEGA duplicators remove stock faster than all but the most experienced woodworkers can, while keeping within very tight tolerances (if the workpiece is heavy enough to not deflect, up to 1/2" can be removed per pass). It works off a template, and can easily work off an original turning (with a 2" maximum turning diameter). Most small-scale lathe duplicating machines do not work well, are poorly made, and the cutters are cheap, often hard or impossible to sharpen, and difficult to replace. And the duplicators will fit only a single machine. VEGA has changed all that. Their three Lathe Duplicators cover mini and midi lathes, and full-sized lathes with swings up to 16". A narrow diamond shaped HSS cutter is included with each duplicator and replacement cutters are available. The Diamond "V" Kit adapts the duplicator to use solid carbide inserts for production situations where frequent sharpening of the cutter is necessary. Each insert is two-sided and replacement inserts are available. The Midi Duplicator is designed to fit almost any midi or mini lathe on the market and copies parts up to 10" long (there is a 24" version available, too). A nice feature of the Vega is that you retain the option to use hand tools to finish the work or to make changes--the Duplicator can either be removed, or mounted on the back of the lathe with the cutter upside down). Not illustrated. The Utility II Duplicator has all the abilities of the Midi Duplicator, but extends sizes to 10-12" swing lathes, with a turning length of up to 36"--this one comes with hardware and mounting brackets for 10-12" swing lathes, plus a riser kit for 16" NOVA lathes. Only uses flat templates, not illustrated. The VEGA Professional Duplicator is designed to fit all 10 to 16" swing lathes, is available in 36" and 48" lengths and comes with all the appropriate mounting hardware. These VEGA Lathe Duplicators share many features: they are designed to be rigid, and are; they are easy to use, with all controls located for fast and easy access; fast set-up (initial set-up takes about 30 minutes, but after that, a couple minutes usually does it); micro-adjustments are easily handled; the duplicators are durable--the chain drive adjuster is one example of solidly engineered-in durability.
$354.99 > Learn more @ Shop.Com!
|
|
12313119 Rockler Woodworking and Hardware
JET Variable Speed Mini Lathe
New variable speed mini lathe allows for quicker speed changing. Features include 1/2 HP totally enclosed fan cooled motor, chrome-plated handwheel, quick cam locks and 2" ram.
$374.99 > Learn more @ Shop.Com!
|
|
17979030 Woodcraft
V-35 Carver w/Foot Control
The V-35 has stepped variable speed (14k, 22k, 27k, 33k), with speed dial clearly marked on the faceplate of the power unit. Forward and reverse are available easily on the same faceplate, as is the power rocker switch (easy to see and operate as it is bright red). The handpiece receptacle is on the left side of the front plate, so all connections and controls are immediately at hand and easy to reach. The handpiece reverse and forward switch defaults to forward and quickly snaps back to forward when released from the reverse position. The coiled cord on the handpiece straightens to more than five feet in length, and is light enough to not interfere with movement when you're carving. You get greater freedom of movement than is possible with flexible shafts. The handpiece is molded and fits the hand exceptionally well. Optional Foot Control allows for full range variable speed from 0 - 33,000 RPM. Accepts 1/8" and 3/32" shank bits.
$419.99 > Learn more @ Shop.Com!
|
|
7971207 Northern Tool & Equipment Company
Jet Custom Bench Lathe Stand For Item 143353
*Jet *Truck Ship.
$499.99 > Learn more @ Shop.Com!
|
Note from Serious Shopping: Some prices shown may not reflect the latest price available at a particular store.
Be sure to check the price and availability when completing your order. Thank you for shopping with a name you trust.
About | FAQ | Contact | Privacy Policy | SeriousShopping.co.uk | eShopConsulting.com
Visit these sites:
Hardware Store and Things You Wear.
| |
|
