 |
8928958 Woodcraft
DELTA 14" Iron Bed Wood Lathe Model 46-715
Model 46-715 . The Delta 14" lathe has a heavy-duty cast iron bed, headstock and tailstock, which provide rigidity, strength, and minimal vibration. Pivoting headstock, with easy access on/off switch, has positive stops at 45 deg , 90 deg and 180 deg to facilitate outboard bowl turning. The mechanical variable speed spindle provides speeds from 500 2500 RPMs. Power is provided by a 3/4 HP, 60Hz, 9.8 Amp induction motor. The unit also provides 24-division indexing. The motor is positioned with cooling fan on opposite side of headstock vs. faceplate. Complete with 6" faceplate, spur drive center, 12" cast iron offset tool rest and steel stand. Capacities: 40" between centers, 7" swing over bed, 5" swing over tool rest, head & tailstock are #2 MT, thread is 1" x 8 TPI, tailstock travel is 3". Shipping weight 400 lb., shipped by common carrier at our regular shipping & handling rate plus $20 for excess weight.
$649.99 > Learn more @ Shop.Com!
|
|
17977071 Woodcraft
36" Pro Duplicator
For anyone who has to make more than a single turned object, duplicators are almost essential to a good job--most tables, for example, look more professionally done when all the legs match. If you're making a production run of pens for advertising or other purposes, getting them as close to alike as possible, and doing the job as fast as possible, is important. VEGA duplicators remove stock faster than all but the most experienced woodworkers can, while keeping within very tight tolerances (if the workpiece is heavy enough to not deflect, up to 1/2" can be removed per pass). It works off a template, and can easily work off an original turning (with a 2" maximum turning diameter). Most small-scale lathe duplicating machines do not work well, are poorly made, and the cutters are cheap, often hard or impossible to sharpen, and difficult to replace. And the duplicators will fit only a single machine. VEGA has changed all that. Their three Lathe Duplicators cover mini and midi lathes, and full-sized lathes with swings up to 16". A narrow diamond shaped HSS cutter is included with each duplicator and replacement cutters are available. The Diamond "V" Kit adapts the duplicator to use solid carbide inserts for production situations where frequent sharpening of the cutter is necessary. Each insert is two-sided and replacement inserts are available. The Midi Duplicator is designed to fit almost any midi or mini lathe on the market and copies parts up to 10" long (there is a 24" version available, too). A nice feature of the Vega is that you retain the option to use hand tools to finish the work or to make changes--the Duplicator can either be removed, or mounted on the back of the lathe with the cutter upside down). Not illustrated. The Utility II Duplicator has all the abilities of the Midi Duplicator, but extends sizes to 10-12" swing lathes, with a turning length of up to 36"--this one comes with hardware and mounting brackets for 10-12" swing lathes, plus a riser kit for 16" NOVA lathes. Only uses flat templates, not illustrated. The VEGA Professional Duplicator is designed to fit all 10 to 16" swing lathes, is available in 36" and 48" lengths and comes with all the appropriate mounting hardware. These VEGA Lathe Duplicators share many features: they are designed to be rigid, and are; they are easy to use, with all controls located for fast and easy access; fast set-up (initial set-up takes about 30 minutes, but after that, a couple minutes usually does it); micro-adjustments are easily handled; the duplicators are durable--the chain drive adjuster is one example of solidly engineered-in durability.
$799.99 > Learn more @ Shop.Com!
|
|
7971162 Northern Tool & Equipment Company
Jet Machinists Belt Drive Bench Lathe -- 9in. x 20in. Size
Cuts 27 thread sizes from 8 to 56 TPI and 11 metric threads from .05 to 3mm. 27 longitudinal feeds from 0.005 to 0.011 inch. Spindle is mounted in tapered roller bearings and has MT-#3 taper with 1 1/2 inch x 8 TPI spindle nose. Maximum carriage travel is 16 inch with cross slide travel of 5 inch. Tailstock adjusts for taper cuts. Lathe has hardened and ground bedways, 7 inch 4-jaw and 4 inch 3-jaw chucks, faceplate, 4-way tool post, quick change gear box, threading dial and tool kit. 3/4 HP, 115 Volt, single phase motor. Truck Ship. *Machinists lathe has 9 inch swing over bed, 20 inch distance between centers *6 spindle speeds from 130 to 2000 RPM
$999.99 > Learn more @ Shop.Com!
|
|
20798672 ShoppersChoice.com
Ammco Brake Lathe Adapter Kit-B
For hub and hubless applications on most passenger cars and light trucks thru 1/2-ton, including composites
$1461.19 Now: $1114.71 > Learn more @ Shop.Com!
|
|
20810362 ShoppersChoice.com
Ammco Brake Lathe Adapter Kit-C
For hub and hubless applications on most passenger cars and light trucks thru 1-ton, including composities.
$2738.00 Now: $1872.16 > Learn more @ Shop.Com!
|
|
20803896 ShoppersChoice.com
Kwik-Way Kwik-Lathe on-The-Car Brake Rotor Lathe
Machine rotors on the vehicle and guarantees zero runout; bolts directly to the caliper spindle casting. Eliminates pedal pulsation, costly comeback & unhappy customers. Money saved by resolving and reducing customer complaints and comebacks will pay for this unit in a year or less! Comes with Extended Accessory Package to handle small imports, 1 ton 4x4s, plus a GM 11mm bolt kit - used on 90 of current GMs. Patented Kwik-Moun included for easier, faster lathe mounting. Note: To use on non-drive wheels, you will need a Power Drive System (KWI 108000402)
$2704.00 Now: $2506.58 > Learn more @ Shop.Com!
|
|
20807135 ShoppersChoice.com
Kwik-Way Power Drive System For Kwik-Lathe
Necessary for turning unpowered rotors while cutting rotors with an on-the-car lathe. Attaches quickly and the constant speed gear drive assures a consistent finish. 1750 rpm; 115V/60hz/1ph motor constant speed gear drive assures a consistent finish. Operating height is fully adjustable from 33 inch to 56 inch
$3328.00 Now: $3083.10 > Learn more @ Shop.Com!
|
|
7973982 Northern Tool & Equipment Company
Jet Bench Lathe -- 13in. x 40in. Size
Powerful performer helps you deliver precision metal parts in less time, thanks to geared head. Gear box gives you large threading and feed capabilities without gear changes. 6in. three-jaw chuck. 8in. four-jaw chuck. 12in. face plate. Metric change gears. 4-way tool post. Steady and follow rest. Precision-ground D1-4 spindle. 13in. swing over bed. 18 3/4in. swing through gap. 40in. centers. 1- 3/8in. hole through spindle with #3MT. Eight spindle speeds, 70 to 2000 RPM. Cuts 40 inch threads and 27 metric threads. 2 HP, 230 Volt motor. Ships truck freight. Stand sold separately. *Jet
$3799.99 > Learn more @ Shop.Com!
|
|
20806198 ShoppersChoice.com
Ammco Combination Disc/Drum Brake Lathe
The Classic, Best Selling Model 4000! Features twin cutters, boring bar, quick drum to rotor changeover, and two spindle speeds Please Note: Adapters are not included, AMM 4000B should be ordered with Adapter Kit-B (AMM 900002B) or Kit-C (AMM 900003C)
$8345.00 Now: $8221.10 > Learn more @ Shop.Com!
|
|
20797221 ShoppersChoice.com
Ammco 4100B Medium-Duty Brake Lathe
Twin cutter tools and quick drum-to-rotor changeover. Adjustable spindle speeds allow for quick rough cut/finish cut settings. Infinitely adjustable spindle-feed gear box. Additional spindle travel to 9. 875 inch (250. 83mm). Ideal for medium-duty truck service. Specifications Rotor Diameter: 19. 0 inch Max. Rotor Face Width: 3. 75 inch Max. Rotor Thickness: 4 inch Drum Capacity (Diameter): 6 inch-28 inch Flywheel Diameter: 17. 5 inch Flywheel Face Width: 3. 75 inch Drum, Rotor, Flywheel Max. Weight: 200 Lbs. Spindle Speed: 100/200 RPM Rotor Feed Rate: 002 inch/. 010 inch/REV Drum Depth Up to 9. 875 inch Drum Feed Rate: 002 inch to. 020 inch/REV Motor: 1 HP Shipping Weight: 480 Lbs. Warranty: 1 Year Spindle Bearings: Bronze Sleeve Standard Tool Bits: Negative Rake Arbor Taper: Double
$9983.34 Now: $9072.16 > Learn more @ Shop.Com!
|
